Saturday, January 17, 2015

Motorcycle Oil Plug Tool

Kawasaki Oil Plug Tool©

Made this tool for Kawasaki Nomad & Vulcan.
Probably other motorcycles can use it too such as my Ironhead Sportster.

The oil plug for the rear hub is a bear to get at on these bikes and hard to loosen if it has never been taken out to check oil level in the hub. Can be used for the engine oil filler plug as well.

You can use a 14mm socket, a 9/16 SAE socket or a 1/2 inch wrench . There is also a through drilled hole for an Allen wrench to slide in for leverage in turning the tool.

No comments: